Table of Contents
Product Overview
YJUAV PB100 is an on-board analog power module, designed for small and medium-sized quadcopter UAVs, supporting up to 60V100A(14S) power systems.It can supply power to the four-channel ESC and the flight controller at the same time, feedback voltage and current analog signals to the flight controller.
Procurement Method
Specification table
| Specification item | Specification item |
|---|---|
| Open source flight controller | Ardupilot & PX4 |
| Input voltage | 3S – 14S(9V – 60V) |
| Input current | Continue 100A(Burst 150A) |
| Ouput ESC channels | Four-channel(ESC1-ESC4) Single-channel max 100A(Burst 60A) Quad channel max 100A(Burst 150A) |
| Output device power channel | Single channel(DEV), maximum 10A |
| Output voltage regulation (For flight controller) | 5.2V/4A |
| Analog voltage detection | 0~60V |
| Analog current sensing | 0~115A |
| Input voltage measurement accuracy | ±1% |
| Input current measurement accuracy | ±3% |
| Operating temperature | -40℃ ~ +125℃ |
| Power connector | XT60 |
| Signal connector | MOLEX CLIK-Mate 5025850670 |
| Dimensions | PCBA: 40mm*40mm*13mm Signal wires: 250mm Power wires: 150mm |
| Weight | 32g(Include wires) |
Interface
Dimensions
